How to Play TV sound thru Fusion Stereo Speakers

[cod]

We have a TV (Toshiba circa 2009) on the bridge that is hard to hear the sound when cruising. I would like to connect to my Fusion Radio. I though I would be able to just connect to the Auxillary port from the stereo receiver to the TV. When I go to connect, I get the loud humming sound... Help! I have to believe this is possible?

 

[bbwhitejr]

Myself and others have purchased a Miccus RX(receiver) and a Miccus TX(transmitter). Plug the receiver into the AUX port on the stereo and the transmitter into the headphone jack on the TV. Pair the two and presto-works better than wonderful! Your Fusion is likely Bluetooth? If so, probably can just get the transmitter for the TV and pair to the stereo.

There are other Bluetooth devices out there, but I bought these per a thread on here and they have been wonderful!

Bennett

 

[cod]

Thanks! Yes, the Fusion has Bluetooth.

 

[bbwhitejr]

If the TV has a headphone jack, you should be good to go. I bought the pair on ebay for less than $75. They are about $35 each.

Bennett

 

[NorCal Boater]

Why would you want to watch tv while you're cruising?

 

[cod]

Why would you want to watch tv while you're cruising?

Normally we don't but we are planning on brining her from NY to Florida at the end of the month and need to keep the admiral happy. It's a minimum of a 7 day journey and we may stretch it to 10 days. So with that said , we have some long days with portions of the journey ocean running, some at displacement speed or waiting for a bridge to open etc. just another creature comfort to pass the time.

 

[Steve Franklin]

Ha, happy wife , happy life . Steve