How to Clean flame arestor?

[User Error]

How do you all clean your flame arestor? Mine has some engine oil in it from a back fire issue i'm working out. I would assume since it's a metal device it can be cleaned/ sprayed with Carb cleaner or brake cleaner and the excess should run threw the layers if held verticle? Any info would be appreciated.

 

[Arizona240DA]

You got it, carb-cleaner will do the trick...make sure it is dry before you fire back up...

You could even use soapy water, but carb-cleaner will produce the best results in my opinion.

C-

 

[rondds]

I use acetone and a toothbrush. Dries quickly and dissolves the gunk.

 

[Stray Cat]

Add some compressed air to either of the above posts. Blow from the inside of the arrestor to force the debris out of the pleats.

 

[Spot]

... you have to clean them? Just kidding, carb cleaner and air is my method

 

[Go Aweigh2452]

I use degreaser and blow it all out with fresh water, let air dry...

but any of the methods already posted will certainly work very well....

 

[Four Suns]

This is one of CSR's best threads:

http://clubsearay.com/forum/showthread.php?t=16292&highlight=arrestor

 

[tdappleman]

Ah... happy memories from that one!

To answer the question - take OFF the engine and use solvent and air and/or a brush and then let dry. You'll be amazed at the amount of crap which comes out.