Hi From Down under

[sea ray skip]

Hi All just purchased My 1st sea ray 2 weeks ago it's a 2005 180sp with the sun deck great boat wife and kids love it also.

I will no doubt need lots of advise over the comming weeks i have one imidiate question. after use in salt water how long should i flush it for?

What should oil presure be?

What should normal opp temperature be?

Anything i should look out for faults pit fall etc etc.

Thanks in advance for any advise and thanks Sea ray for a great product. :grin::grin:

 

[Chris Dauth]

Welcome aboard !
I'm in Hervey Bay.
Don't know much about the 3.0l power plants, but there will be plenty here who will be able to answer your questions.

 

[sea ray skip]

Hi Chris hervey bay great spot a lot warmer than vic at the moment.

 

[tdappleman]

Welcome! Flushing the engine usually takes me about 10 mins. That gives the engine enough time to warm up and open the thermostat and then flush plenty of fresh water through. Usually by the time I've unloaded things after a trip and plugged in shore power, etc it's done and ready for the next use.

 

[sea ray skip]

Thanks mate i will do same have a great day.