Help with access to Anchor Roller

[devildogae]

I have a 1995 Sea Ray Sundancer 250. The anchor roller is bent and the roller isn't rolling. I want to replace it, but I don't have any access. I look into the anchor locker and I see the bolts but they are far out of reach. It looks like the fiberglass might come down on the underside, like an access panel, but I know know if this is correct or how to get it down. Figured someone would know.

 

[MonacoMike]

It is difficult, but the access is through the anchor locker.

MM

 

[Gofirstclass]

Do you or do you have any friends that have a son who is about 10-12 years old and knows how to handle a wrench?

 

[devildogae]

It is difficult, but the access is through the anchor locker.

MM

WOW, that job is going to suck. I can see myself getting stuck down in there.

 

[devildogae]

Do you or do you have any friends that have a son who is about 10-12 years old and knows how to handle a wrench?

That's a good idea!!

 

[Gofirstclass]

I usually draft the son of a friend who can wiggle his skinny butt into the area where my fart filter is. That's how I thought of it.