HELP!!! Need to replace the Scarface Gold push button cabinet knobs

[Maybe A Dancer]

Not to disgrace Al Pacino or Michelle Phiefer, but the gold just has to go away !

Rubbing compound will work on the big hand rails but I need some help with the locking hinged cabinet buttons.

Seems like I saw a post on CSR sometime last year where these could be had in brushed nickel at a reasonable price, but my forum searches provide no joy.

Anyone got a handle on a source for these with the rosettes?

BEST !

RWS

 

[ranger58sb]

Go to flounderpounder and search for Hafele stuff. Can't tell from your description but that might be what you're after.

-Chris

 

[Chris-380]

These are for 2000 380 DA

https://www.searay-parts.com/pushbutton-chrome-knob-p/haf-knob%20chrome.htm

https://www.searay-parts.com/rosette-round-chrome-p/haf-rose19-rnd-chrome.htm

 

[MonacoMike]

I completely removed all the gold from my 2000 Cruisers that is about the size of a 400 Sundancer. I bought everything from flounder pounder. It cost nearly $2000 to completely change out everything. We switched everything to brushed nickel.

The most expensive parts were doorhandle sets that were about $200 apiece and I had three of them. Than the Vimar light switch covers are about $40 apiece, I needed 20.

Then the push button cabinet knobs, I had near 40 on the boat and I wanted the metal, not the plastic knobs and I believe that the knob was about five dollars in the circle around it was about four dollars apiece.

I did call flounder pounder and talked to Ben and I think he gave me a 10% discount for buying all of that at one time.

 

[Cocktail Time]

RWS- If you go this route, I'll buy a few of the gold pushbuttons. I have a couple that are scuffed.

 

[Stee6043]

I just recently bought the knobs to get things rolling on my boat:

 

[my3sons]

I think brushed nickel is timeless and looks great on the Cherry, but if I had white, I might look at black. Black is in all the new build homes now and even the higher end rv’s have gone that way. Never seen it in a boat, but I would like to.

 

[fwebster]

Harris,

Hafele cabinet hardware is pretty commonly available in the home improvement market and is substantially cheaper than most anyone in the marine area.

In the end, I decided to replace only 2-3 knobs just to keep the boat original.

 

[Maybe A Dancer]

RWS- If you go this route, I'll buy a few of the gold pushbuttons. I have a couple that are scuffed.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

You won't have to buy them, just pay it forward.

PM me your mailing address - no hurry

It'll likely be a couple / few weeks yet

 

[Chris-380]

Harris,

Hafele cabinet hardware is pretty commonly available in the home improvement market and is substantially cheaper than most anyone in the marine area.

In the end, I decided to replace only 2-3 knobs just to keep the boat original.

thank you, found them a lot cheaper at https://thebuilderssupply.com/hafele-22903626-round-rosette-for-push-lock

 

[Shoyrtt]

thank you, found them a lot cheaper at www.builderssupply.com

That link does not work

 

[MonacoMike]

Did SR put plastic knobs on their boats? My 97 270 had metal. I just so much like the feel of the metal knobs, I can tell which knobs just by looking.

https://www.fpmarine.com/rosette-round-satin-p/haf--rose-plastic-nickel.htm

https://www.fpmarine.com/rosette-round-satin-p/haf-rose19-rnd-nickel.htm

 

[Carver370]

I replaced all of mine from homedecorehardware.com

I needed 24 for my 400, it was about $260 for the brass brushed nickel rosettes and push buttons.

 

[Maybe A Dancer]

RWS- If you go this route, I'll buy a few of the gold pushbuttons. I have a couple that are scuffed.

Please PM me your mailing address

Sending you half and another CSR member in Warren, MI the other half

BEST !

RWS

 

[Chris-380]

Please PM me your mailing address

Sending you half and another CSR member in Warren, MI the other half

BEST !

RWS

Did your drawers work out, mine need a 3/8” pin extension. The originals were 1/4”, not long enough for the chrome

 

[Maybe A Dancer]

yes - worked out fine

The sliding drawers did in fact have an "extension"

 

[Chris-380]

Thank you
Did you go with the brushed nickel (plastic) or chrome?

yes - worked out fine

The sliding drawers did in fact have an "extension"

 

[Maybe A Dancer]

plastic brushed nickel

my 26 year old factory knobs were plastic as well

 

[fwebster]

Just make the extensions out of aluminum round stock. I made a few of them with my lathe. I just used the lathe because I have one; you could just saw the round stock and sand them to the exact dimension and finish you want.

 

[Saverio]

I used these
https://www.amazon.com/gp/product/B07L2PGRM8/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1