Help installing replacement ignition switch.

[Chucklm]

2001 SR 240 Sundeck - Can someone please assist me in accessing the rear of the ignition switch? Does the panel with all the gauges above have to come out?

 

[Bt Doctur]

Depends if you can see the ign switch and wires.if not the dash must come out for access

 

[Chucklm]

Depends if you can see the ign switch and wires.if not the dash must come out for access

It is closed underneath and behind.

 

[Steve Craig]

Look in the storage area ahead of the helm. My 210SD has a canvas/carpet hatch mounted up high, fastened with snaps. Pull it off & all the gauges are visible. In mine the ignition switch can be replaced from here, yours is same year but a little longer. I expect it would be about the same set-up.

 

[Chucklm]

No

Look in the storage area ahead of the helm. My 210SD has a canvas/carpet hatch mounted up high, fastened with snaps. Pull it off & all the gauges are visible. In mine the ignition switch can be replaced from here, yours is same year but a little longer. I expect it would be about the same set-up.

No access from behind the storage area.....I removed the 8 screws holding the gage panel to the dash. It is pretty easily accessed from there. I did cut off a wire tie to be able to pull the entire switch out to change the wires. Thanks!