help finding someone who is good at wiring

[out-n-aboat]

I have an older 92 sundancer and I need someone who can repplace the fuses in the dash, re-wire my radar from the arch to the dash. ( the person who I hired to install it could not chase the wire from the bottom of the arch to the dash, so the wire is coming out of the round knock out at the bottom of the arch) Install a transducer for my garimin, and install a transucer and a dept finder in the dash. I dont have the time to do this my self, and will pay for a quality installation.

 

[andyr]

I have done most of this and will talk you through it if needed. For the radar, you have do undo the arch on the starboard side, pull it away a few inches and drill a hole because the existing hole for the wires to lights in the arch is not large enough. Once you are through the deck, it is an easy run along the side to the dash. The sounder transducer is a problem if the boat is in the water depending on the type of transducer. The transom mount ones can be installed with boat in the water but they often catch debris and kick up. In hull transducers are best but can't be done with boat in water. Consider a shoot through the hull mount. They are inside and shoot through the hull. Can be installed with boat in water. They lose a little range but unless you are fishing 150 ft down, it won't matter. I don't get the replace the fuses task. Do you mean add a fuse holder for more fuses?

 

[out-n-aboat]

I have done most of this and will talk you through it if needed. For the radar, you have do undo the arch on the starboard side, pull it away a few inches and drill a hole because the existing hole for the wires to lights in the arch is not large enough. Once you are through the deck, it is an easy run along the side to the dash. The sounder transducer is a problem if the boat is in the water depending on the type of transducer. The transom mount ones can be installed with boat in the water but they often catch debris and kick up. In hull transducers are best but can't be done with boat in water. Consider a shoot through the hull mount. They are inside and shoot through the hull. Can be installed with boat in water. They lose a little range but unless you are fishing 150 ft down, it won't matter. I don't get the replace the fuses task. Do you mean add a fuse holder for more fuses?

Boats out of the water. So the tranducer should be easy. Taking the radar arch off and might be tricky. How do you do that?