Help - 2001 Sea Ray 280 DA - panel rocker switch required

[Dave Brown]

Hi all i am trying to locate a 12 volt switch to install in the electrical cabinet in the cabin.
The accessorie slot as a blanking plate fitted which can be popped out and replaced with a rocker switch as same as all the others.
I wish to fit a switch in the slot but would like to fit the same type so it will push straight in and look the same as all the others.

Could any body tell me the make / model of the switch so that i can source the part.


Kind Regards,

Dave.

 

[mistercomputerman]

Try this:

http://www.searay-parts.com/

 

[Lazy Daze]

I found on my boat that Carling Switch was he manufacturer, but was no longer able to get the "exact" switch (physically fits, but cosmetically slightly different). Pull one of the other switches and look on the back side for the label - it should have the manufacturer's ID and part number. Then call the manufacturer to verify and either buy through them or ask for a known retailer.

Although I believe the switches that Sea Ray is currently using is different from what you have, you might also check with your dealer. While they probably can't get one from Sea Ray anymore, there's a decent chance that they might still have some in a bin on a back shelf.

 

[Dave Brown]

Good news, found the switch they are still made by Carling under their M series rocker switch, the only difference is my old switch says on and off and the new one reads 1 and 0
other wise identical in every way!:huh: