Hatch lift replacement 2011 sundancer 350

[desperado]

Motor failed on one hatch lift and somehow was broken. Good mechanic has been doing research and said company that made these hatch lifts for my 2011 sundancer 350 doesn’t make them anymore. So said I may have to replace both because you can’t have two separate brands of lift for obvious reasons.

Any ideas for this? I guess I could call sea ray I don’t know if they could help or not.

thanks

 

[Lazy Daze]

Call your dealer - Sea Ray still shows as having some stock of those.

 

[desperado]

Thank you very much. I called my MarineMax dealer and they said they could do a special order. Really appreciate it my mechanic just wanted to make sure it matched the other lift so it would operate properly thanks again

 

[Lazy Daze]

Thank you very much. I called my MarineMax dealer and they said they could do a special order. Really appreciate it my mechanic just wanted to make sure it matched the other lift so it would operate properly thanks again

You got it!

Yes, I looked at your original part number and then checked the inventory at Sea Ray and saw they still had some. I was amazed they were still under $400, though!

 

[bbwhitejr]

Were it me...order 2...install the two new ones and keep the current one as a spare. The older your boat gets, the harder these will become to find.....

Bennett

 

[Spark600]

Just did this on my boat, These were the only one that would hold up the hatch when it was open, All others would slowly go down.
Goggle this company they come in all different lengths

Visit the PROGRESSIVE AUTOMATIONS Store
12V High Force (2000 lbs. / 30 in.) Linear Actuator.IP 65 Protection for Industrial, Agriculture Usage. Brushed DC Electric Motor and Stainless-Steel Stroke. Model PA-17-30-2000

 

[George48051]

Just did this on my boat, These were the only one that would hold up the hatch when it was open, All others would slowly go down.
Goggle this company they come in all different lengths

Visit the PROGRESSIVE AUTOMATIONS Store
12V High Force (2000 lbs. / 30 in.) Linear Actuator.IP 65 Protection for Industrial, Agriculture Usage. Brushed DC Electric Motor and Stainless-Steel Stroke. Model PA-17-30-2000

I have a 2000 Sundancer with an 18” stroke Thinking of replacing it with a pa-17-18-2000

 

[USMC(ret)]

Just did this on my boat, These were the only one that would hold up the hatch when it was open, All others would slowly go down. Goggle this company they come in all different lengths Visit the PROGRESSIVE AUTOMATIONS Store 12V High Force (2000 lbs. / 30 in.) Linear Actuator.IP 65 Protection for Industrial, Agriculture Usage. Brushed DC Electric Motor and Stainless-Steel Stroke. Model PA-17-30-2000

Hello all; new member & new (to me) 320DA owner. I’m loading a couple of these Progressive actuators in the Amazon basket & would like to know how yours have held up since you’ve had them. Worth it?

 

[Spark600]

Hello all; new member & new (to me) 320DA owner. I’m loading a couple of these Progressive actuators in the Amazon basket & would like to know how yours have held up since you’ve had them. Worth it?

Yes, Two years and they are still the same as I bought them.