Grease Points?

[rpasquarello]

OK could only find one of allegedly three grease points for 2010 MerCruiser 5.0 with a Bravo One. Does anyone know where the other two are or have a picture?

 

[Brite Idea]

2010 240 Sundancer with a Bravo One? Sure it's not a Bravo Two? I'm not even aware of any zerk fittings on a 2010 Mercruiser product? If memory serves correctly there are two fittings on the rear of the engine coupler that only a magician can get to. Where is the fitting that you found located? Is it the gimbal bearing one?

 

[rpasquarello]

2010 240 Sundancer with a Bravo One? Sure it's not a Bravo Two? I'm not even aware of any zerk fittings on a 2010 Mercruiser product? If memory serves correctly there are two fittings on the rear of the engine coupler that only a magician can get to. Where is the fitting that you found located? Is it the gimbal bearing one?

definitely a bravo one. A very uncommon set up. I believe the one I did find is the drive coupler on the inside by the transom underneath the steering cables, etc.

I believe that “zerk” is the proper term for the grease fitting…

 

[scoflaw]

That's probably your only grease point. Why would the B1 be uncommon?

 

[rpasquarello]

That's probably your only grease point. Why would the B1 be uncommon?

For my year, you usually see Bravo 3’s….