CARIBOU
Member
- Jun 4, 2019
- 56
- Boat Info
- 1989 340 Sundancer Humminbird Helix 7 6.5 Quicksilver Genny/ a/c / Central Vac/ Ice Maker.
- Engines
- Twin 7.4,s Shaft Drive
Hello 1989 Quicksilver 6.5 Genny on our 89 340 Dancer is in need of a new Raw water pump. Had it to pump specialist and could not get apart to replace parts (no parts can be found anyway) Did not want to break housing as it needs to go back on Genny. Apparently no inner parts or complete pump available through any marine or aftermarket suppliers in U.S or Canada. The Genny is a Quicksilver 4 Cylinder Nissan(60 HP.) with Generac electrics. This was original equipment in 1989. I'm thinking on adding a 12 volt Sureflow pump Fused and switched to the raw water intake with a switch that would be turned on prior to starting Genny. The pump would need to draw approx. 5 Gallons per min to circulate through the heat exchanger in the Genny. I will install old pump and pully back on the Genny so it will just free wheel without having to go to a different size belt. I have had no luck after many hours of looking and calling all over the place. Does anyone know of a supplier or should I go to plan B and install new pump. Im happy with plan B but need some input. The old pump needs new seals and bearings. I replaced the A/C circulating pump this year and will probably go with the same kind of pump Thanks in advance Steve.