Fuse? Depth gauge and flood Light 340

[JustJeff017]

Good afternoon,

Newbie Sea Ray owner here 1988 340 EC. I am wondering if anybody knows of a fuse that may be used between the Depth gauge and the bow flood light since neither one work. It's really hard for me to do this here as the boat is 2 hours away from me, but I am going to work on her Saturday and am looking for places to look and to rule out. Thank you in advance for the assist.

 

[JimG]

The bow spot light draws much more current that the gauge light will. Not likely to be a common fuse/breaker. Look for two problems.

 

[Pyrojodge]

On the right hand side where you have the ign there should be a toggle labled Spot light. Make sure this is on before you try using the light. Depth gauge will be fused follow the wires (probably inside the gauge pod) and check the fuse... hope this helps...

 

[Pyrojodge]

Found a picture...

 

[Mike Blake]

What kind of depth gauge is it? More info will help you.

 

[JustJeff017]

What kind of depth gauge is it? More info will help you.

Lowrance Sonar gauge

Going off of memory so it could be a bit tricky....Thanks

Thank you Pyrojodge

 

[Pyrojodge]

You got it Jeff:thumbsup: any time!