encrypt
New Member
I have a Sea Rat 290 Sundancer and the dashboard fuel gauge and SmartCraft fuel gauge stopped working. I do not see a fuse for it. Any ideas on where to start?
Thanks
Al
Thanks
Al
Fuel gauge not working
- Thread starter encrypt
- Start date
boatmailster
Well-Known Member
there is no fuse for fuel gauge.
I assume you didn't "play" with smartcraft and disabled fuel sender by accident.
99% sender needs to be replaced or maybe it got somehow disconnected (there is a plug on sender cables - they only few inches long)
I assume you didn't "play" with smartcraft and disabled fuel sender by accident.
99% sender needs to be replaced or maybe it got somehow disconnected (there is a plug on sender cables - they only few inches long)
encrypt
New Member
I just purchased the boat and I was playing with the smartcraft the day before. I'll go to the boat tomorrow and check the plugs for the smartcraft and I did see the section on the installation manual that shows how to initialize and program the unit. It does not look that complicated. But first I'll try to back track what programs I played with.
Guanxix
Member
Are the gauges working? i.e. speedo, etc. If not, then you will need to re-seat the SmartGuage connector. I had a similar problem and have seen several other posts with the same problem. Seems to be a manuf issue
encrypt
New Member
All other gauges work.
encrypt
New Member
programed the tank for fuel in the smartcraft and the gauges started to work.