delliott00
New Member
Install a tank monitor for your holding and fresh water (plus up to 2 more tanks with additional sensors) without opening the tanks!
Identical to this one:
http://www.foreandaftmarine.com/LED-102MU4.htm
It includes 2 sets of stick on tank sensors and the LED display. No need to get into your holding tank! They apply to the OUTSIDE of the tanks. You have to have plastic or fiberglass tanks, but they work great and will not clog or corrode. Instructions and wiring harnesses included. Never used, never installed.
I bought this for an old boat (Donzi 275) that I haven't owned for a while, and I'm doing a little housecleaning (LOL!) so I'm selling it here.
I paid about $140+shipping about 2 years ago. Will sell for $100 via paypal and that will include shipping (since it weighs about 1lb). I can refer you to my perfect ebay feedback or could list it there for you with a buy now price.
The only thing you'll need is some extra wire to run between the sensors and the display. Its easy to hook up: Two power wires at the display, and 3 wires running from the display to the bilge where the tanks are.
For more info on how it works, see here:
http://www.snake-river.org/Products.asp
UPDATE: Here is a picture of the one I'm selling. One clarification, the product listing above from forandaft is incorrect. The picture shows exactly what I am selling, with the display and 4 stick on sensors. But the description says it includes 4 tank senders. That is most likely NOT correct, as that model only came with two. It does come with 4 adhesive senders, but you need two per tank (one at the top and one at the bottom) for it to work. The price they have listed was the price for 2 tanks, and the unit can handle up to two more if you purchase additional senders.
Note: The display is in perfect condition. The picture I took makes it look like its scratched, but that is a flash artifact. The display is cosmetically/mechanically perfect.
Hope that helps. PM me if you have any questions.
-Dave
'04 280DA
'07 Sea Hunt 220
Previous: '04 320DA, '00 Donzi 275
Identical to this one:
http://www.foreandaftmarine.com/LED-102MU4.htm
It includes 2 sets of stick on tank sensors and the LED display. No need to get into your holding tank! They apply to the OUTSIDE of the tanks. You have to have plastic or fiberglass tanks, but they work great and will not clog or corrode. Instructions and wiring harnesses included. Never used, never installed.
I bought this for an old boat (Donzi 275) that I haven't owned for a while, and I'm doing a little housecleaning (LOL!) so I'm selling it here.
I paid about $140+shipping about 2 years ago. Will sell for $100 via paypal and that will include shipping (since it weighs about 1lb). I can refer you to my perfect ebay feedback or could list it there for you with a buy now price.
The only thing you'll need is some extra wire to run between the sensors and the display. Its easy to hook up: Two power wires at the display, and 3 wires running from the display to the bilge where the tanks are.
For more info on how it works, see here:
http://www.snake-river.org/Products.asp
UPDATE: Here is a picture of the one I'm selling. One clarification, the product listing above from forandaft is incorrect. The picture shows exactly what I am selling, with the display and 4 stick on sensors. But the description says it includes 4 tank senders. That is most likely NOT correct, as that model only came with two. It does come with 4 adhesive senders, but you need two per tank (one at the top and one at the bottom) for it to work. The price they have listed was the price for 2 tanks, and the unit can handle up to two more if you purchase additional senders.
Note: The display is in perfect condition. The picture I took makes it look like its scratched, but that is a flash artifact. The display is cosmetically/mechanically perfect.
Hope that helps. PM me if you have any questions.
-Dave
'04 280DA
'07 Sea Hunt 220
Previous: '04 320DA, '00 Donzi 275
Last edited: