Fridge and Freezer Replacement for a 2006 40' Dancer

MI Dreamin

New Member
Apr 10, 2018
9
Boat Info
2006 40 Sundancer
Engines
Cummins QS85.9-380 Diesels
I am looking to replace my fridge and freezer in the galley but am having trouble finding ones that fit my openings (or are close). My fridge opening is 21 1/2" w x 25 9/16" H and my freezer opening is 18 5/8" w x 20 13/16" H. Any help would be appreciated. Thank you.
 
I am looking to replace my fridge and freezer in the galley but am having trouble finding ones that fit my openings (or are close). My fridge opening is 21 1/2" w x 25 9/16" H and my freezer opening is 18 5/8" w x 20 13/16" H. Any help would be appreciated. Thank you.
I replaced mine with NOVA COOL fridge and freezer . And their website they have the cross reference from your part numbers to theirs for direct replacements, these are my replacement

 

Attachments

  • IMG_8325.jpeg
    IMG_8325.jpeg
    41.3 KB · Views: 29
  • IMG_8324.jpeg
    IMG_8324.jpeg
    49.9 KB · Views: 29
  • IMG_8326.jpeg
    IMG_8326.jpeg
    46.3 KB · Views: 28
theres a post in the 390 da forum that says someone replaced with isotherm c130, and isotherm drawer 55 freezer. this is my plan this offseason, i have the same boat. the measurements are very similar. i called vitrifigo last week because i liked a unit they had which let u decide on the fly whether u wanted a freezer or fridge. but their smallest unit was too wide for the freezer spot.
 
Nova Kool and Isotherm will have direct replacements. I have 1 of each, both cool/freeze very well as they have the same compressors section.

The only difference is the Isotherm units are more European sized and are slightly smaller than the original cutout, requiring some shimming or trimming to get them mounted.
 
heres what i got off isotherm website also with my measurements off boat....
isotherm c130. 29.6H x 21.4W x 21.4D. thats from isotherm.
fridge on my boat... with flange. 31 1/8H x 23 7/16 W
inside flange 29 5/16H x 21 3/8 W

i guess i should call isotherm again and see if they gave me the measurements with or without the flange
 

Forum statistics

Threads
112,719
Messages
1,417,478
Members
60,767
Latest member
Fixin2b1
Back
Top