Mstrlucky74
Member
Tank is full and pump is running when I flip switch but water won't come out my sink or transom hose. What should I do/check to troubleshoot? Thanks
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Is it just the one sink and hose , or is it all sinks. Check airator and screen on transom hose
Look at the filter on the inlet to the water pump. If you hear the pump running and see air bubbles in the filter you are sucking in air somewhere. So essentially its like drinking a drink with a straw with a hole in it and you get some drink but mostly air...
If that is the case it could be one of the fittings from the water tank or one on the filter, or the filter itself is not sealed tightly or has a crack... You should be able to hear the hiss of air with the pump running when you get close to the culprit..
Good luck, this was the most annoying fix for me on the old boat and most time consuming..
If the pump doesn't stop running then you have to prime it. Turn pump off, disconnect outlet side of pump. Turn pump on and water will shoot out the outlet side, reconnect outlet side while pump is still on and shooting out water, u may take a bath your first time but you'll get better at it.
No it should build pressure and then shut off, then when u turn any water on you'll hear the pump kick on to build the pressure back up. U need to prime the pump.