Fresh Water pump to the bathroom & sink

[tblanchard]

All my water pump to the bathroom and the sink are not working, I tested the electricty and it does not seem to be working, could it be an old pump which needs to be replaced or is there more to it than that?

Thanks
TOM

 

[mwph]

Are you getting the light on at the switch at the helm?
When you "tested the electricity", do you mean at the pump itself?
Did it quit working all of the sudden?
Any other battery related issues?

I guess some more details would let us know how far your trouble shooting has taken you.

 

[Lucky's]

I guess some more details would let us know how far your trouble shooting has taken you.

This sums it up well. Need a bit more info. If you have no power at the pump, trace the power lead back to its source. You will find a broken wire or a blown fuse. If you have power at the pump, the pump is bad and needs replaced.



Shaun
Sent from my iPhone

 

[edsmax]

Check to see if your fuse blew. My pump apparently "died" this past winter. When I would try turning it on via the switch on the helm, it would blow the 10amp fuse. Bought a new Shur-flo aqua king replacement on ebay for around $100. Direct replacement, easy install and pumping fine now.

 

[wvsundancer]

did you clean out your scren that is on the line that goes into you pump???

 

[Mike Blake]

No one asked......tank full? As said in the last post screen clean?