I have a brand new (still in the box) Northstar 550 Chartplotter along with the correct Smartcraft Gateway that allows you to interface it with the single engine smartcraft system to pull up information from your engine's ECM thru Smartcraft right on the Chartplotter. This is a spare system I had for my last boat which was a 2006 260DA. I never had to use it.
Since the boat is now sold, I wish to sell these spares. New, this equipment would have cost over $700 as I recall. The Chartplotter itself comes complete with a seperate GPS antenna. The Chartplotter can be mounted right in your dash or on top of the dash. You will need to purchase a smartcraft cable extension from Mercury as well as a multiport connector. (Everything is plug and play). Since I documented pretty much everything about this equipment in a couple of key threads here on the forum in the years past, I suggest you read these first if you are interested in purchasing this equipment. There are numerous pictures of the Chartplotter in these threads.
http://clubsearay.com/showthread.php/1065-Interfaced-my-Navman-with-Smartcraft?highlight=northstar
http://clubsearay.com/showthread.php/4189-Fuel-burn-numbers-for-my-2006-260DA?highlight=northstar
I also have a C-MAP card for the Chartplotter that will cover lakes in both North and South Carolina and will throw that in if you are a boater in the area. Otherwise, you will also have to purchase a C-MAP card for your area.
I want $275 for this equipment and I will cover the cost of shipping. I also will want to talk to any prospective purchaser first as well so you have a full understanding of what you are getting and what you will have to do to install it.
So if you are interested, PM me with your email and/or phone number so we can talk further.
Dave Schwertner
Since the boat is now sold, I wish to sell these spares. New, this equipment would have cost over $700 as I recall. The Chartplotter itself comes complete with a seperate GPS antenna. The Chartplotter can be mounted right in your dash or on top of the dash. You will need to purchase a smartcraft cable extension from Mercury as well as a multiport connector. (Everything is plug and play). Since I documented pretty much everything about this equipment in a couple of key threads here on the forum in the years past, I suggest you read these first if you are interested in purchasing this equipment. There are numerous pictures of the Chartplotter in these threads.
http://clubsearay.com/showthread.php/1065-Interfaced-my-Navman-with-Smartcraft?highlight=northstar
http://clubsearay.com/showthread.php/4189-Fuel-burn-numbers-for-my-2006-260DA?highlight=northstar
I also have a C-MAP card for the Chartplotter that will cover lakes in both North and South Carolina and will throw that in if you are a boater in the area. Otherwise, you will also have to purchase a C-MAP card for your area.
I want $275 for this equipment and I will cover the cost of shipping. I also will want to talk to any prospective purchaser first as well so you have a full understanding of what you are getting and what you will have to do to install it.
So if you are interested, PM me with your email and/or phone number so we can talk further.
Dave Schwertner