After removing the screws holding the instrument panel in several times, the fiberglass behind the panel has worn out to point where the screws will not get tight. Any ideas on a fiberglass repair to the area so a new hole can be started?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
OH! This reminds me of another CSR suggestion for the list:
"Plastic drywall screw anchors are a good repair for stripped screws in fiberglass"
Thanks!
Epoxy and re-drill to do it the "right" way.
I've been known to use the toothpick method, but since I've got a box full of wire ties on the boat...
Bend it in half, stick it in the hole. Insert screw. Cut off excess with a utility knife.