LivinLife
New Member
Has anyone run into the PS/HI and PS/LO fault codes on their air conditioners. I have a 2002 380DA that has the SMX Cruisair system. Over the past week, when the heat was running, the HI/PS code would flash, and when the A/C would run the PS/LO code would flash. I have a seperate systems and both push water while the systems are running. The salon system is the only one that is flashing a code and shutting down. It seems to push good water through, although it may not be as much as the master cabin system. I have not had time to look at the impeller and strainer yet or to check for any blockages. Was hoping to get some quick feedback if anyone has been through this before.
Thanks!
Thanks!