Engine Data with Simrad Nss Evo 3s

[Jeff Sollows]

Hello All, Is it possible to view engine data from my horizon 8.1S engines to my Simrad NSS Evo 3S displays? If yes, what parts would I need to purchase? Thank you

 

[Strecker25]

Hello All, Is it possible to view engine data from my horizon 8.1S engines to my Simrad NSS Evo 3S displays? If yes, what parts would I need to purchase? Thank you

they're probably smartcraft ready which makes life easier. What year engines?

 

[Jeff Sollows]

they're probably smartcraft ready which makes life easier. What year engines?

Thank you. Engines r original 2002.

 

[Jcclark85]

I have Raymarine Axiom chartplotters and used Fox Marine gateways to get my engine data to my axiom plotters. I have the same engines and same year. It was a simple install, ran a nmea 2k backbone down to the engine compartment and plugged the gateway into the engine port and then into the backbone and the date showed up. I’m not familiar with simrads products but it should work if you have a nmea2k backbone- check with fox marine they are supper knowledgeable and pretty quick to reply

 

[Jeff Sollows]

Thank you very much for your reply. I will contact Fox today!

 

[Rob WIcha]

You need Mercruiser vessel view link. It converts smart craft to NMEA2000

 

[baktasht]

I did the Fox Marine engine gateway. Ties right in to your NMEA2000 network to display on your chart plotter, and you can also view it via bluetooth on your ipad or phone.

-

 

[Greg Lions]

I've used yacht devices gateway.. worked a treat!

 

[Jeff Sollows]

Thank u all. Does anyone have options for a new deck refer? Thank you