Engine Alarm ?

cabrale

New Member
Sep 1, 2008
23
Ontario Canada
Boat Info
2001 310 Sundancer, 5.7L with v- drives and genny
Engines
5.7L mercruiser v-drive
I have a 2001 310 Sundancer 350 mag v- drives after waiting for the 2 long beeps, i proceed to push the ignition toggle switch down completely as the engine is cranking it beeps again then stops beeping once the engine turns over, oil pressure and temperature are all normal levels are good
only happens on starboard, any ideas?
 
Outside of fluids you really need to hook up a CDS to find the fault. Sounds like a water pressure sensor. Is the boat run in salt water or fresh? Does it sit for a while or do you run it often? If you do not have access to a CDS - you can swap the sensors out from one engine to another and see if it goes to the other engine. Good luck.
 
Thanks for that tip i will try it the next time i,m up at the boat. It is in freshwater and sits for at least a week before usage.
 

Forum statistics

Threads
113,187
Messages
1,428,227
Members
61,099
Latest member
Lorenzo512
Back
Top