PlumCrazy4spd
Member
- Aug 24, 2019
- 35
- Boat Info
- 1988 270DA
- Engines
- Twin 5.7
Hey guys, unfortunately had an engine go on me at the end of the season last year, I purchased a reman and started switching all the peripherals over. When I got to the fuel pump I noticed the block had no provision for a mechanical pump. I ordered the Carter Marine Universal pump. Comes with the pump, the pigtail harness, the relay and a cheap filter. Electronics are not my strong suit on these. Where would you guys pull keyed power from and for the low oil pressure cut off, would you just run a tee off the back of the block and maintain the use of the stock oil pressure sensor and run the switch off the other part of the tee? Thanks in advance