Electric Bed actuator stopped working

[GWICK]

Hello Everyone,
We have an electric actuator on our bed that retracts it about a foot to allow for more space at the entrance to the bedroom. We went to use it this week and it does't do anything when the control is pushed. I checked the breakers and they are all on. Is there an in- line fuse I should be looking for? Any thoughts would be appreciated.

Thanks
Garrett

 

[ETsubchief]

Can you get to the motor? If so, then check if you have pwr when the switch is activated, or put you hand on it to see if it is trying to move.
I don"t know for sure, but there probaly not be a fuse in-line with it.

Also have you tried to push/pull the bed when the switch is being operated? Maybe the bed got abit wonky and is jammed up?

 

[detjoet]

we had the same problem with our 2008 330,,it did give signs of going bad, loud whistle sound while bed went up or down, now nothing. Once we hit a big wake and when I opened the peekaboo inside the port side closet I found the unit fell off its mount and unplugged. Once put back in place and plugged in it worked..haven't seen any fuse for it and owners man doesn't have much on it.

 

[Steel Away]

I just bought a 2008 330 and have the same problem. Actuator brought the bed down flat and promptly stopped working. Is there a way to override the actuator and move the bed manually? Any thoughts would be much appreciated!
Thanks,
Jeff

 

[Blueone]

I just bought a 2008 330 and have the same problem. Actuator brought the bed down flat and promptly stopped working. Is there a way to override the actuator and move the bed manually? Any thoughts would be much appreciated!
Thanks,
Jeff

Not sure about the bed but my engine hatch has an access hole where you can reach in and pull the pin between the actuator ram and the bracket attached to the hatch in my case and I would assume you would have the same thing