Dual horn -replacement needed

[Cynthia]

we have a 2003 240 sundancer. Our horn went and I’m trying to find its replacement. It’s mounted on the front of the boat and there are 2 holes drilled out for the speakers to slide in. The only luck I had was for the “speaker- ferroelectric loud speaker “ from the us patent # 4979291. The speakers seem to be attached to the grille. Any suggestions on a replacement. Do you think I’ll need to change the size of the hole? Many thanks!!!

 

[Shaps]

is that just a cover for dual horns?
A-23 is just a generic horn and i am guessing the 1100 and 1102 after that is HI and LO

Maybe these?
https://www.amazon.com/SeaLux-Marine-Stainless-Steel-HIDDEN/dp/B06XYG61NH

https://www.amazon.com/AFI-10001-Marinco-Mini-Electric/dp/B000NI39SY/

 

[Cynthia]

Shaps - I really don’t know. They came out of the boat together. I’m assuming I just glue them together? I don’t have a picture of the boat holes for it.

 

[Shaps]

https://s3.amazonaws.com/srweb-pvt-...ic/parts-manuals/2003__2003-240-SUNDANCER.pdf

 

[Cynthia]

Ahhhhh. That part with the Amazon link is way too big. They seem to be the same piece- like original.

 

[Cynthia]

This is template I made of the old unit. Both shaded areas are cut out of the boat. I can always purchase a new metal
Plate- link you provided. CN I simply mount the new horn inside the hull, next to the open metal face plate? We are BTW on a lake, not ocean.

 

[bfernald0]

http://www.clubsearay.com/index.php?threads/horn-replacement.77437/

 

[Pilot]

we have a 2003 240 sundancer. Our horn went and I’m trying to find its replacement. It’s mounted on the front of the boat and there are 2 holes drilled out for the speakers to slide in. The only luck I had was for the “speaker- ferroelectric loud speaker “ from the us patent # 4979291. The speakers seem to be attached to the grille. Any suggestions on a replacement. Do you think I’ll need to change the size of the hole? Many thanks!!!
View attachment 146127 View attachment 146126

Recommend you put that cover back on and forget about replacing with the same unit. Then buy yourself an electric dual trumpet horn. Run the wiring, and a push button switch and drill holes to mount somewhere convenient.They sell them pretty inexpensively and sound and look great.