Drive Lube Low warning message
- Thread starter Zeusmt
- Start date
Little Ducky
Well-Known Member
- Jun 5, 2017
- 2,655
- Boat Info
- 1998 290 Sundancer
- Engines
- Twin EFI 5.0L w/Alphas
Kohler 4kW
Should have a little square bottle that's almost clear to put the drive lube in. It has a MAX line almost in the middle.
BTW please become familiar with your engine bay. I bet there's a DVD in your packet of info to show you everything about your boat.
BTW please become familiar with your engine bay. I bet there's a DVD in your packet of info to show you everything about your boat.
dan313
Active Member
Yes it the same. Always check it before you go out. My drive was leaking from the drive shaft. Had to be resealed. The only way i knew it was leaking is because the gear lube monitor was showing a loss of oil.
Keep and eye on it.
Good Luck
Keep and eye on it.
Good Luck
scoflaw
Well-Known Member
- Aug 10, 2011
- 6,395
- Boat Info
- 1999 Powerquest legend 260 sx 502 mag
2005 Baja 242 islander 496
- Engines
- 502 mpi Bravo 1
496 mag B1
Don't add anything until you know exactly what fluid it calls for
You ?likely? have Bravo III's? Your signature doesn't mention it. Yes, Quiksilver is the same on the inside - both are Mercruiser products. You MUST use the hi-performance stuff in a Bravo drive... it is advisable to use it in Alphas.
