Dash drain fitting

[jzanthony]

Hi last ditch effort before having something made, need the inserts that drain water away from dash have tried a few different sources but no luck yet.
If anyone has info would be greatly appreciated.

Cheers

 

[Mark Searay]

Im not sure how water can flow when the lip is higher that the dash right?
Maybe put a little white silicone into the broken one just around the edges and may work better than the "non broken one" - i would try that first to save some money AND be more effective.
I have never noticed these are above the line of the dash before (because never looked I suppose)

 

[Chris-380]

Had a little rain come in yesterday, I noticed I had 3/8” of water pooled between the drains

anyway, I googled “1/4" tubing grommet” and found a couple pieces that might work

good luck!

Im not sure how water can flow when the lip is higher that the dash right?
Maybe put a little white silicone into the broken one just around the edges and may work better than the "non broken one" - i would try that first to save some money AND be more effective.
I have never noticed these are above the line of the dash before (because never looked I suppose)

 

[jzanthony]

Awesome thank you very much, I've been vacuuming out under the dash as the water just spills into there

Cheers

 

[jzanthony]

Your info led me to these going to order now

Thanks again

https://thmarinesupplies.com/products/push-in-impact-drains?variant=15967867895851

 

[Chris-380]

Your info led me to these going to order now

Thanks again

https://thmarinesupplies.com/products/push-in-impact-drains?variant=15967867895851

Awesome, glad you found something, hope they work!