Jack
Member
I have installed a cradle point 1200B on the boat hooked to a rogue wave for wifi and a usb 4gLTE modem for failover. Everything works great except the failover part. Anytime I turn on the IPv4 failover check the cradle point will not connect to the rogue wave. Is anyone using a similar setup and if so could you share how you have configured failover. Cradle point has been of no help as there solution is to turn failover off, connect to the rogue wave and a wifi hotspot and then turn failover back on. This is not an acceptable way to operate the router as far as I am concerned. Thanks in advance for any help you can offer!