Boater71
Member
- Mar 5, 2018
- 321
- Boat Info
- 2008 Sea Ray 310 Sundancer
- Engines
- MX6.2 MPI Bravo III DTS with Axius and SeaCore
Kohler Genset
Looking for some guidance, did a compression test and results were: two at 100, one at 115, and three at 120. The others are 140 and 135. I'm looking to buy this boat and this is my initial test - will do another compression test after the sea trial in a couple of weeks. Engine is Mercruiser horizons 6.2 with 224 hours - 2008. This was out of the water test. The port engine broke the sparkplug so we could not so the compression test at this time. Oil samples being tested. Looking for guidance on this.
I figured they needed to between 140 and 150.
I figured they needed to between 140 and 150.