Cockpit table replacement

[Dive Girl]

We've got a 2000 340DA. We'd like to update our cockpit table and replace it with one that's wood. Does any one have any ideas or recommendations on where to buy one?

 

[Bridog]

Hopefully CSR member Henry Boyd will chime in but if not I would PM him or do a search. His work is top notch. Good luck. Brian

 

[topgun1185]

I made my own. Very simply I just bought a peice of mohogany from a speciality suppler and used the exsisting table a templete. The new table is the same size and thickness (so it store's away the same) I routed the edges with a heavy 1" round over bit, stained and varnished. I've gotten a lot of complements and it dresses up the cockpit a little. I always liked a little wood on a boat. No pun intended. Oh and I also routed and then glue in a veener compass rose then a bought on line.

 

[mwph]

Hopefully CSR member Henry Boyd will chime in but if not I would PM him or do a search. His work is top notch. Good luck. Brian

If you don't make it yourself then there is NO DOUBT he is the man!

 

[Uplate]

You may want to check out this thread.
http://clubsearay.com/forum/showthread.php?t=19967&highlight=teak+table+uplate

Several people I know have bought these and they are great value.

 

[Henry Boyd]

DG,

I have an unfinished (no coating) teak grate table hanging around that is an exact drop in for a 3xx table.

Here is a picture of a finished slightly larger table:

Here is the table in question in production:

Here is a custom 320 table that is slightly larger. I have done this both as fixed and as folding:

Feel free to PM me with any questions, or if you just want dimensions.

Henry

 

[Dive Girl]

Wow, Topgun, I wish I were talented enough to make a table. Being able to stow it in the existing spot is a nice option. I'm heading out to the boat tomorrow it measure the existing table. I'll contact you, Henry.

 

[hack4alivin]

My coworker made this for me last season. It was made to the same dimensions as the original so I can use the old tables cover when not in use.

 

[Dive Girl]

Wow! I like it!

 

[bone354]

Dive Girl I sent you personal mail Rich

 

[Daniel P Thomas]

Dive Girl
I made this one last year using Garelick parts and the original Sea Ray base that I bought from PW Marine on this site.
Laminate top with an oak full bullnose edge with 4 coats of satin varnish on it.

Dan

 

[Uplate]

My coworker made this for me last season. It was made to the same dimensions as the original so I can use the old tables cover when not in use.

Thats freakin awesome. 3D router?

 

[Luckydogs]

I bought one last year off Ebay, it was for a newer model 320 but same size as mine and it really dressed up the cabin. Periodically check out ebay and flounder pounder

 

[hack4alivin]

Thats freakin awesome. 3D router?

Yes computerized. We used the jpeg template that was used for boat name on the transom. Cleaned it up on the computer to clean out the shadow and using the software that came with the router it did the cutting.