Carver370
Well-Known Member
- Mar 30, 2007
- 1,928
- Boat Info
- 2000 Sea Ray 400 Sundancer - Diesel
- Engines
- T-3116 CAT - 350 HP
I have 2 tables that would be a great replacement for the standard fiberglass cockpit tables or even a small interior table.
1. This is from a Regal boat, Cherry wood finish with a very thick clear coat over the top and black trim around the edges. Can mount to any standard pole and socket. Only flaw is a small hairline crack in the top which is barely noticeable, it was very hard to get a picture of it. This table was replaced upon delivery of the boat to a corian table top.
Dimensions are roughly 16" wide X 43" long.
$150 + Shipping or local pickup.
2. This table is from a Carver 350 Mariner, the salon / dinette table. I believe this is a fiberglass table with the corian counter top look to it. I think this would be a great replacement for a cockpit table. No flaws I am aware of, it was replaced with a teak table when the boat was new so it has very little use.
Dimensions are roughly 25" wide X 54" long.
$175 + shipping or local pickup.
PM me on here or email at RayBock@hotmail.com
312-735-4511
Ray
1. This is from a Regal boat, Cherry wood finish with a very thick clear coat over the top and black trim around the edges. Can mount to any standard pole and socket. Only flaw is a small hairline crack in the top which is barely noticeable, it was very hard to get a picture of it. This table was replaced upon delivery of the boat to a corian table top.
Dimensions are roughly 16" wide X 43" long.
$150 + Shipping or local pickup.
2. This table is from a Carver 350 Mariner, the salon / dinette table. I believe this is a fiberglass table with the corian counter top look to it. I think this would be a great replacement for a cockpit table. No flaws I am aware of, it was replaced with a teak table when the boat was new so it has very little use.
Dimensions are roughly 25" wide X 54" long.
$175 + shipping or local pickup.
PM me on here or email at RayBock@hotmail.com
312-735-4511
Ray
Last edited:
