Centering steering wheel on 260 Dancer.

[Moose]

This may be nitpicking but can you adjust the wheel so that when you are steering "straight" the SeaRay logo on the wheel is horizontally level? Thx.

 

[billnpat]

This may be nitpicking but can you adjust the wheel so that when you are steering "straight" the SeaRay logo on the wheel is horizontally level? Thx.

Take off the steering wheel via a center bolt, then center it with the rudders straight. that's what i did....

 

[Tonka Boater]

Take off the steering wheel via a center bolt, then center it with the rudders straight. that's what i did....

Yours might have 6 (or so) hex screws under the center cap that will allow you adjust the wheel in small increments. Take the boat out on a nice calm, flat day and get up on plane and make a mental note of how far off your wheel is. Then back at the dock remove all of the hex screws and center the wheel accordingly.

 

[David Paul]

Yours might have 6 (or so) hex screws under the center cap that will allow you adjust the wheel in small increments. Take the boat out on a nice calm, flat day and get up on plane and make a mental note of how far off your wheel is. Then back at the dock remove all of the hex screws and center the wheel accordingly.

Agree. It will have the hex screws and this is the easiest way to center it.

 

[Moose]

6 hex screws off, ro.tated wheel one screw, perfect!! No sweat