I've searched and searched but I can't find the proper repair procedure for a sloppy snap in the fiberglass. I think it involves filling the oversized hole and redrilling but I'm not sure which product to use or how large the hole should be? Any help would be appreciated.
Canvas snap repair.
- Thread starter jg300da
- Start date
wish2fish
Active Member
I have seen people use a piece of wood like toothpick and reinstall the snap or fill with a exterior caulk, let it dry and then reinstall the snap. The second method would be my preference
RonF
New Member
- Oct 4, 2006
- 410
- Boat Info
- 310 Sundancer 1999
- Engines
- Mercruiser Mag 350 MPI, V-drives
I have also found snaps with the next larger size screw Like a #8 instead of #6. Worked for me. I don't remember whether I found them at West Marine or Boat Owners' Warehouse.
H2ONUT
Well-Known Member
www.mcmaster.com page 3215, bout half way down are the #8 size.
I just repaired one today by placing a 3"x3" piece of treated wood ( smeared with 3m 5200 sealant ) behind and running the screw/ snap into it. Obviously you need access behind the affected snap.