searay495
Active Member
- May 26, 2008
- 604
- Boat Info
- 2004 420 Sedan Bridge
- Engines
- Twin Cummins CTA 8.3m
480 HP
I'm hoping someone can figure this out!! I have a 2002 340 Sundancer with small block motors. The serpentine belt on the port motor began to squeel at all RPM's. The belt was tight and the tensioner new. The noise would go away with belt dressing, but quickly return. I replaced the belt last winter and all seemed quiet. After a few hours of running time the squeel slowly came back and increased after time. Does anyone have a solution. I thought I read in one forum that someone tried a "gator" belt. I hate to have to spend money on a new belt since this one only has about 3 hours on it. Any suggestions are appreciated.
Thanks, Mark
Thanks, Mark