Daytripper
New Member
NOTE: This was previously posted incorrectly in another discussion board
Hello Everyone!
Back on Club Sea Ray after a 3+ year absence. Finally got back into boating and picked up nice 1998 Sea Ray 180BR. Unfortunately the support pole attachments for the canopy top are missing. These allow the top frame to connect to the windshield frame. They are only about 12" or so long, but having the proper size is important if I want to order side and aft curtains. These were used on the 180BR from 1998-2001.
I have all the pieces to make my own - hardware, 7/8" tubing, etc. However, I do not know the tube length dimension.
Could someone please help me with that measurement? I would like the length from the inside seat of the endcap to the open end of tube. That will tell me how long to cut it.
I contacted Sea Ray. They referred me to Great Lakes - which has not responded to my requests.
Many thanks in advance.
Picture of my boat coming soon! (Have to make it look nice first)
Hello Everyone!
Back on Club Sea Ray after a 3+ year absence. Finally got back into boating and picked up nice 1998 Sea Ray 180BR. Unfortunately the support pole attachments for the canopy top are missing. These allow the top frame to connect to the windshield frame. They are only about 12" or so long, but having the proper size is important if I want to order side and aft curtains. These were used on the 180BR from 1998-2001.
I have all the pieces to make my own - hardware, 7/8" tubing, etc. However, I do not know the tube length dimension.
Could someone please help me with that measurement? I would like the length from the inside seat of the endcap to the open end of tube. That will tell me how long to cut it.
I contacted Sea Ray. They referred me to Great Lakes - which has not responded to my requests.
Many thanks in advance.
Picture of my boat coming soon! (Have to make it look nice first)