Bill Gillespie
Member
I have two knobs that are losing their gold color. Do I replace the knob or the who mechanism? Where do I find them?
Bill
Bill
Cabinet push pull knobs
- Thread starter Bill Gillespie
- Start date
cod
Active Member
FP Marine.
magstang1
Active Member
The knob itself can be replaced. It just unscrews.
Alegria
Well-Known Member
Yep sea-rayparts. com. I am replacing all from gold to nickel. Replacing the knop, rosette, and mechanism.
magstang1
Active Member
If only I could find the little gold T shaped molding that Sea Ray loved to use around the cabinets. THAT would make my day.
Alegria
Well-Known Member
You got that right would like to find a replacement for that too.
tdschafer
Well-Known Member
I posted a response in his other thread (check it out). I still have the contact info and part numbers - if you want, send me your email address and I'll forward it along. Along with where I bought these locally (to me, anyways) - turned out to be less expensive than FP, too.
GrandMaster
New Member
- Mar 27, 2012
- 727
- Boat Info
- 1995 Sundancer 290
Generator, AC
- Engines
- Twin Mercruiser 4.3L
Dont know if they have what your looking for...but the name is promising..
http://www.t-molding.com/store/home.php?cat=
dantheman1966
New Member
Bill,
I ordered these knobs from a closeout store and have about 20 extra if you need them?
Dan
I ordered these knobs from a closeout store and have about 20 extra if you need them?
Dan
magstang1
Active Member
Are your knobs gold or silver?
alwhite00
Active Member
If they are silver I'd be interested in whatever Bill does not use - Probably need 5 or 6
LK
magstang1
Active Member
Lazy Daze: could you forward the information to me as well please. Mine are showing their age.
tdschafer
Well-Known Member
LD,
I'd like that info too please!
Sent from my iPhone using Tapatalk
I'd like that info too please!
Sent from my iPhone using Tapatalk
mistercomputerman
Well-Known Member
- Jan 6, 2008
- 4,321
- Boat Info
- 410 Sundancer - 2001
- Engines
- Twin 8.1L Mercruisers - 2009
I just put all this information into a new thread - between the interest here and the PM's, it seemed like a good thing to do. I had excellent customer service from both Hafele and the supplier where I bought the items. On top of that, the price was amazingly low. I had to actually ask him a few times if it was correct!
Here's the thread: http://clubsearay.com/showthread.php/59834-Hafele-Push-Pull-Knob-Replacement?p=673169#post673169
Here's the thread: http://clubsearay.com/showthread.php/59834-Hafele-Push-Pull-Knob-Replacement?p=673169#post673169
alwhite00
Active Member
Oh yea, That will work, Just thought I would take some off his hands if available. Honestly this will be a fall project, I am in the middle of adding on my garage and building a patio so I have been busy for the last few weeks.
LK
dantheman1966
New Member
Gold
