earthmover17
New Member
When I pull up the fishfinder, depth screen on my C120 it just shows 1/2" to 1" wide bars at all different levels across the screen. The bars go from the bottom of the screen to a certain depth towards the top. As I understood the way this is supposed to work the depth line is supposed to run fluidly across the screen at the appropriate depth. It's almost like it picks it up for a second and then loses signal.
Should I be looking at the transducer or the C120 itself? All other functions on C120 work fine.
Jack
Should I be looking at the transducer or the C120 itself? All other functions on C120 work fine.
Jack