Jeff Evans
Member
- Dec 30, 2006
- 58
- Boat Info
- 1987 460 EC
- Engines
- 3208TA (375 HP) Catapiller
Hopefully folks here can help me out with my project. I have a 1987 Sea Ray 460EC with Caterpillar 3208 engines (375 HP). I have added an Actisense EMU-1 to bring my analogue engine temp, oil pressure and fuel tank levels into my NMEA 2000 backbone.
I now need to characterize the oil, temp and level sensors. The gauges are by Teleflex. I assumed the senders are Teleflex but they are Caterpillar supplied.
Does anyone have the sensor part numbers or even better, the sensor output table so that I can properly scale the output. Any assistance would be great.
Note: Temp gauge range: 120 – 240 F, Pressure gauge range: 0-80 PSI, both are 33 – 240 ohm.
I now need to characterize the oil, temp and level sensors. The gauges are by Teleflex. I assumed the senders are Teleflex but they are Caterpillar supplied.
Does anyone have the sensor part numbers or even better, the sensor output table so that I can properly scale the output. Any assistance would be great.
Note: Temp gauge range: 120 – 240 F, Pressure gauge range: 0-80 PSI, both are 33 – 240 ohm.