Bravo 3 not raising up all the way

[wrasse]

I have twin 2006 bravo 3 with twin controls that has the trim switch and separate trailer position switches in front of it.

I can bring the drive up to the trim limit using either the trim switch on the lever or the trailer position switch, however, I can't bring the drive further up to trailer position.

I am hitting the trailer up position switch but it doesn't go up any further, just cuts out at the upper limit of the trim range.

Any ideas?

 

[390x]

If the "earmuff" sender on the side of the drive is malfunctioning, or out of adjustment, this can happen.

 

[wrasse]

Figured it out. Just needed to press the trailer trim/tilt toggle switch down harder to bring it up. Didn't realize the toggle switch had staged settings.