Boat lift

[Mick & Denise]

Hello, I am putting a lift in for my 1996 50 ft Sundancer. I am trying to get angles and dimensions at the sling marks. I have emailed SR but only got a generic storage cradle dimensions. I will be picking it from the bottom with a cradle at the 2 lift sling marks. Can anyone help?

 

[fwebster]

Not seeing the information you were furnished, I'm doing some guessing here, but Sea Ray builds storage cradles that conform to the exact shape of the hull. The 2 main cradles are positioned at the sling marks. Since their cradle fully supports the entire bottom from chine to chine, I'm guessing that they don't provide more detail because they want to see the hull fully supported when it is lift or cradle kept.

 

[Mick & Denise]

Frank, Thanks for the response. The "cradle" that they gave me has 3 cross braces. The first is under the rear sling mark and the other 2 are about 2-4ft away from the forward sling point. Even in the cradle sketch they provided me it shows how wide and how far apart but no angles and no depth at the sling points. This I fear is going to be a tough one. I did send this request for the new Sea Ray tech on here also but have not heard anything as of yet.