Boat cover pole fell in water...

[Mstrlucky74]

Where can I buy the pole the "tents" the boat cover so water doesn't pond/puddle on cover. Mine fell in water? Couldn't really find anything when I tried to google. Thanks

my cover has the hole in the middle where a little tip in the pole stuck through.

 

[bbwhitejr]

Where can I buy the pole the "tents" the boat cover so water doesn't pond/puddle on cover. Mine fell in water? Couldn't really find anything when I tried to google. Thanks

I picked up an adjustable one at WalMart for about $12.

Bennett

 

[Black Valkyrie]

You can get any pole, cut it to size and stick a tennis.ball.on either end. Dollar store works just fine.

 

[Mstrlucky74]

You can get any pole, cut it to size and stick a tennis.ball.on either end. Dollar store works just fine.

Thanks . Yes but i Need that little pointy thing that was at the end of the pole to stick through the hole in the boat cover. I'll figure it out.

 

[Black Valkyrie]

Put a screw in one end of the pole and a tennis ball on the other.

 

[boatman37]

mine has the plastic vents and i made my own poles out of PVC with a little 'H' patterned stand on the bottom. i didn't glue the bottom so i can remove the upright for easy storage. Not sure if there is a way to put a small bolt or pin in the top end for your application though

 

[Quint4]

http://www.sailrite.com/search?keywords=pole

 

[Lazy Daze]

They are a very common item. If you stop by your local marine store, they should have them (or can get them for you). They are available with the black, plastic "pin" that sticks through the grommet hole in your cover.

 

[GCHOG]

g'morning, Amazon has them online, Both Atwood and Taylor Made make them , about $19. The end (tip) is reverseable. if you have the pointer type , great , if you have the snap type. simply loosen the set screw . remove the tip and reverse it and re-install the set screw. Done deal.

 

[skibum]

http://www.iboats.com/3-in-1-Super-Support-Pole-22-59-Taylor-Made/dm/view_id.371006