Bilge/Speedo/Exhaust purge

Johnny Dimez

New Member
Oct 22, 2022
23
Virginia Beach
Boat Info
1998 Sea Ray Sundancer
Engines
5.7 II
My Bilge pump, exhaust purge, and speedometer stopped workin on my last trip. I checked the fuse panel, they’re all good.

The switch lights come on but nothing happens.

Any ideas?
 
Usually a fuse between bilge and batteries. Mine was blown when I bought it. Agee with above
 
Thank you guys for the suggestion. I checked and the fuse is good. Blower is not operating either. They both stopped working at the same time which is why I figured it was a fuse.

I’ll look around some more for another fuse.

I’ll also check power to the pump and blower once I’m off work.

If anyone has more suggestions for me to check is appreciate it.
 
Could run a jumper to pos on blower if you can reach, also check all fuses under the dash. Actually pull them and look at them closely.
 
The fact that they all stopped is suspicious. Check all wiring under dash and engine
 
Turned out a fuse was blown after all. Visual check was good but physic check was bad. Blower still isn't working and speedo looks like it's analog. I'll keep digging. Thank you for all the suggestions this far.
 
So is the blower still not working it could just be a bad blower check to see if you have power going to it when the switch is on
 
Correction, my buddy used a 30A fuse to test the bilge. It worked so now we need to chase the wires, starting with disconnecting the pump.

Geesh, boats are more maintenance than I imagined.

I’ve already dropped $1k on my trailer this season! Hope that’s the end of it.
 
It's an expensive hobby. Don't get scared.marine parts are 3 4 times the money than auto
 

Forum statistics

Threads
113,356
Messages
1,431,058
Members
61,208
Latest member
glen a
Back
Top