hey all, I have a 2000 210 signature bow rider. I pulled her out of cold storage and was doing my checks before parking in the slip and noticed that my bilge pump and bilge fan are not working. I pulled the fuse panel and the fuses for both where blown. I replaced the fuses and still nothing when pressing the switch. I pulled the bilge pump out and tested it directly on the battery and it’s working. Next I traced the wires back as far back as I could behind the motor and put a volt meter on them and no power is getting to the wires that feed the pump. All the other switches like lights and such on the panel work fine but I can also hear a relay click when I press them. No click when pressing the bilge pump or bilge fan. What should I check next? There is a float switch wired in as well with two separate wires but I should get them to come on with the switch panel.
