bilge pump 99 340

[georgelbenson]

Shower / AC sump pump was not working, I cleaned it out, very nasty and still did not work, replaced the bilge pump (800 GPM) and the float switch, still not working, the emer bilge is working fine as is the one located behind the engines. Is there a seaprate breaker for this pump? Is there an in line fuse? Is it wired to the emergency bilge pump?because I replaced that one too and may have rewired it wrong. It would think it is right if it is working. Any help with this would be greatly appreciated..

 

[flarepoman]

Did you check to see if it had 12V's at the pump?

 

[chumbley]

The shower sump is a separate breaker on the DC panel in the bilge. It is not wired to the emergency pump (fore or aft). The brown/orange wire should be hot.

 

[georgelbenson]

have not checked for 12V assumed no power..will check DC panel good info thanks for reply

 

[flarepoman]

What year is your 340?? I have a wireing diagram from searay I got from them 3 years ago