Bilge exhaust fan

[Nmor830]

Hoping someone could supply me a part number for the bilge exhaust fan for a 08 340 Sundancer. Had the boat detailed and somehow they left the bilge fan on. When I came back 3 days later the led on the panel was on but the fan is dead. Couldn't find it on the SR parts list.
Also, any one know where the fan located in the bilge?
thanks,
nick

 

[ASH]

Check for a breaker first....Those fans can (and are designed to) run a LONG time. If it does need replaced they are not really a sea ray specific fan....figure out if it is a 3 inch or 4 inch and almost any supplier can fix you up. To locate it in the bilge just follow the "dryer hose" looking vent hose up from the bilge area up to the side vents and it should be inline somewhere.

 

[JimT]

You should have two in line bilge exhaust fans. Unlikely they both kicked at the same time so as mentioned by ASH its likely an electrical issue. Check the breaker and then the switch on the helm and the one at the main panel for the generator.

 

[Nmor830]

You should have two in line bilge exhaust fans. Unlikely they both kicked at the same time so as mentioned by ASH its likely an electrical issue. Check the breaker and then the switch on the helm and the one at the main panel for the generator.

Thanks for the info. Will be checking breaker and fan later today
Nick

 

[Nmor830]

Thank you both for taking the time to reply. I'll be checking the breaker and the fans later today.
Nick