bennet trim tabs?

[SAshton]

How do you remove the lexan cover to get to the fill plug to top off fluid? There are screws in the front where there is a cover where the lines go into. Are those the 4 screws I need to remove? I haven't really looked so I figured that I would ask 1st.

 

[Dave S]

That information including the owners manual, proper fluid to use, etc. is available on Bennett's web site. http://www.bennetttrimtabs.com/downloads.htm

 

[estebanj]

Also, to check, you shouldn't need to add fluid unless there is a leak. Trim tab fluid (ATF) is not consumed, so if you are adding because it seems low, look for a leak somewhere.

Esteban

 

[SAshton]

The manual is very hard to read(the diagram is anyways)

 

[fc3]

I think I remember that there is a phillips screw on the top of the cover. Remove that. The filler is in the corner and is tiny. You'll need a small funnel. Retract the tabs before filling. Do not fill with the tabs extended unless you want to clean oil from the bilge.

Best regards,
Frank