Axiom Custom Dashboard

Tim Fila

Well-Known Member
Aug 24, 2020
448
Boat Info
Boatless
Engines
Boatless
Does anyone know how to create a custom engine dashboard in an Axiom 12+.

I like the main engine dashboard but would like to remove some things and add others. I know I can add 4 data boxes, but would like to change a few more things.

Also, is it possible to reset the max engine temp?

Thanks,
Tim
 
All that stuff is customizable, touch and hold for most of it. Call Raymarine tech support they are great to walk you through some of it .
 
It's things like...on the right side of each tach is the engine temp. My temps are around 160 degrees. The goes to 300 degrees. I'd like to change the max temp on that so that I have a better idea what temp is, but am unable. Or add it so that it is just a numerical readout. I'd like to get rid of trim tabs as I don't have a sensor for those. That is not user replaceable, can only hide it. I wouldn't have a problem with hiding it, but you can only add 4 other data boxes, and I'm already using my 4. I don't have gear sensors, so I'd like to replace those as well, but they aren't replaceable either.

Thoughts?

Tim



attachment.php
 
I do have the 3.14 update
Well.... What way are you feeding the engine info to the Axiom? N2K or older vessel view module? Looks like you might have to buy their new module, I wondered what they were going to make you do.... I have been waiting for someone with new 3.14 and vessel view to test this.
 
Well.... What way are you feeding the engine info to the Axiom? N2K or older vessel view module? Looks like you might have to buy their new module, I wondered what they were going to make you do.... I have been waiting for someone with new 3.14 and vessel view to test this.

No idea! All the NMEA, backbone, gateway talk is WAY over my head.
 

Forum statistics

Threads
113,193
Messages
1,428,280
Members
61,104
Latest member
Three Amigos
Back
Top