Captain Ron
New Member
I just tried to install a new Ongaro trumpet horn on our '87 weekender. The horn works as I applied 12 v directely to the horn (good loud sound). I checked the end wires before connecting the horn and I had 12.6 v. So I connected the horn and only get a slight tick/tap sound out of the horn. I checked the voltage at the horn and only get 6.2 v on the line with the horn connected. I undid the horn wires and get about 12.6 v. Hook the hoon up again and get 6.2v and no good sound when the button is pushed. Am I missing something?:smt013