Aluminum Dinette Table Post...Anyone know where to find one?

[jwfoster4]

We just did our first boat/camping trip on our boat. When I purchased it, the cabin dinette table post was no where to be found. It is SeaRay part # 689232 and according to my dealer, it is no longer made. We used the cockpit table post instead, but it is 3 inches shorter and was not comfortable. The one I need is a ribbed aluminum post that is tapered on both ends and should be 30 3/4 inches long. Any help on a used one or after market one would be appreciated.

 

[estebanj]

Check eBay... there are some there, but not sure about size. Also, West Marine or other boat supply stores (Overtons).

Also try Todd part number 6005-xx where xx is the lenght of the post.

http://www.toddusa.com/productdetails.aspx?cid=49

Esteban

 

[boatmailster]

Re: Aluminum Dinette Table Post...Anyone know where to find

We just did our first boat/camping trip on our boat. When I purchased it, the cabin dinette table post was no where to be found. It is SeaRay part # 689232 and according to my dealer, it is no longer made. We used the cockpit table post instead, but it is 3 inches shorter and was not comfortable. The one I need is a ribbed aluminum post that is tapered on both ends and should be 30 3/4 inches long. Any help on a used one or after market one would be appreciated.

part number may be no longer available but dealer should be able to find replacement
they still use this type of pole on new boats
if he cant help you, go to showroom and measure poles,
order the one you like

 

[Sundancer]

I'd try any RV dealer. I'm sure they could fix you up with the right length and probably have a tool to taper the ends appropriately. I'm guessing it would be a WHOLE lot cheaper than a Sea Ray part! :thumbsup:

 

[eddiezuskin]

measure the base in the floor which should be same as in the table and visit your friendly muffler shop. They may have the right size pipes or be able to fabricate something. Someone with a similar boat should be able to give you measurements.
Good luck,
Eddie

 

[2lkmead]

I agree regarding the RV dealer. I purchased a table base at an RV dealer. Not the same quality as the Todd base but it served the purpose. They had a number of poles of varying lengths as well.