air conditioner says Lo?

[steriltech]

Hi guys,
I want to thank all for your great replies:smt038 I went down to the boat today had a great time... I notice that my air condiioner worked fine than stopped? I turned it on and ran for 5 mins than shut of I looked at the panle an it says Ac Lo...... dose this means it need free-on??? If so is it hard to do? what can I do any ideas would be helpful Thanks all.....:thumbsup:

 

[fc3]

AC LO means low voltage. PS LO means the low pressure cut-off switched tripped. So you have a power problem. Were you running on shore power or the genset? If shore power, check your connections. You might have a bad or marginal shore power connector. If a connector feels hot, that's a big problem! If you were on the generator, it might need an adjustment.

Best regards,
Frank

 

[Groucho]

Might want to check your water strainer...mine had some stuff in it and was creating error codes.

 

[artswarlock]

Mine did the same thing I am at the end of the dock. Checked voltage and was getting 110v with nothing on. The marina is going to take care of it. That was last week, came out this week and when I turned the breaker on the display on the stat did not come on. I had voltage at the unit but no display. Any idea's